Welcome to GoldMaster

  • December 24, 2021

Why the service life of gold selection equipment is different



Many customers may wonder why the same centrifuge has a long service life, while others are very short. Here I will answer this question for you. The service life of gold selection machinery and equipment mainly depends on how much attention the user attaches to it, regular maintenance Maintenance, pay attention to the handling of materials that cannot be processed, so that it can run healthily and its service life will be prolonged. Many gold selection owners use gold selection machinery and equipment for a few months to carry out a major repair, and some customers use it for several years. There have been no failures, so reasonable maintenance and use of the centrifuge is the key to the life of the gold selection machinery and equipment.


Gold selection machinery and equipment generally have the following characteristics. Gold selection machinery and equipment are generally used for alluvial gold, gold panning, and river gold mining and sorting. They are especially suitable for capillary gold recovery and fine-grained gold recovery. Many of them are also used in Other industries, such as coal mines, and even pharmaceutical and chemical industries, are mostly used as accessories on gold panning ships. Let’s talk about the operation of gold mining machinery and equipment. No matter what kind of gold mining machinery and equipment are used, they are almost the same. .


1. Gold selection machinery and equipment all have an indicator light that shows whether the power is on. When the indicator light is turned on, we should check whether its internal parts are worn. If the wear-resistant part inside reaches more than 30%, we will These worn parts should be replaced in time to avoid damage to the equipment. When the light fails and no longer lights up, we need to check the circuit of the gold selection machinery and equipment, especially whether the fuse in the electric box is damaged. Generally, most of them are damaged. Because the fuse here is burned out, it will cause a fault. At the same time, it is also necessary to check whether each thread is in poor contact. If the above problems are found, it must be dealt with in time, strengthened and replaced.


2. When starting the gold selection machinery and equipment, you must check each instrument panel in advance to check whether the oil pressure and lubricating oil indicators of each component are up to standard. When the pressure is too high, you must not work blindly. You must check whether there is too much oil and the amount of oil. In the case of not exceeding the standard, we need to check whether each oil delivery pipe is blocked, so that each component can be in a state of oil balance, and the gold selection operation can be carried out under the condition of smooth oil pressure.


3. After the gold-selecting machinery and equipment have been used for a long time, a lot of oxides may be produced on the surface of the machine. At this time, it is necessary to check whether this substance is also produced between the parts. If there is too much of this substance, it will cause There are gaps or too close between the various parts, resulting in problems with the matching of the parts, so it must be cleaned and maintained in time.


4. The rotating device is undoubtedly the core part of the gold selection machinery and equipment, so the attention to the rotating device must be more important. The rotating device generally uses the principle of coils to move, so it must be checked regularly. When there is a failure, use Multimeter and other instruments to check.


5. The transmission shaft of gold selection machinery and equipment must be checked regularly to prevent oxides and materials from clogging, resulting in increased friction and damage.


6. For the cleaning of gold selection machinery and equipment, the internal bulkhead and shaft of the centrifuge must be cleaned frequently. When cleaning, it is necessary to open the inlet and outlet for cooling, and then clean up when the temperature is the same as the outdoor room temperature.


Quickly Inquiry

GoldMaster